當前位置：深圳市大成機電技術有限公司>>振動與監測系統>>Bently振動探頭>>Bently Nevada 350500 Pressure Transducer Systems

Bently Nevada 350500 Pressure Transducer Systems

返回列表頁

參考價

面議

具體成交價以合同協議為準

產品型號

品牌

廠商性質其他

所在地深圳市

在線詢價 收藏產品查看聯系電話

聯系方式：查看聯系方式

更新時間：2026-04-02 14:05:58瀏覽次數：21次

聯系我時，請告知來自環保在線

產品分類 品牌分類

  振動與監測系統

Bently監測系統

Bently振動探頭

全部產品列表

暫無信息

深圳市大成機電技術有限公司

經營模式：其他

商鋪產品：195條

所在地區：

詢價 給他留言

產品簡介

FeaturesandBenefits TheCylinderPressureSystemconsistsofthe165855CylinderPressureTransducerandthe146824Interconnectcable

詳細介紹

Features and Benefits

The Cylinder Pressure System consists of the 165855 Cylinder Pressure Transducer and the 146824 Interconnect cable. It is intended for measuring the cyclic absolute pressure changes inside a reciprocating compressor cylinder. This transducer is an integral part of a Reciprocating Compressor Condition Monitoring and Asset Management System when utilized with our 3500/77M Cylinder Pressure Monitor and System 1* Plant Asset Management Software.

The Cylinder Pressure Transducer has a robust design for high reliability in harsh chemical environments.
The unique, patent-pending design also allows the transducer to continue to provide an accurate pressure reading, even after being continually cycled over large pressure gradients for an extended period of time.
The transducer can also withstａnd over-pressure situations caused by application upsets without diaphragm degradation, returning to normal operation when the operating pressure returns to the transducer’s specified operating pressure range.
The Cylinder Pressure Transducer is also designed to meet NEMA 4X and IP67 conditions for moisture ingression.

The 350500 Dynamic Pressure Charge Amplifier (DPCA) is a component in a dynamic pressure sensing system. This sensing system, which monitors pressure pulsations that result from combustion instability in gas turbine engines, consists of a charge-coupled piezoelectric pressure sensor, low noise interconnect cable, 350500 charge amplifier, and monitoring device.

The dynamic pressure sensor should be a high-temperature piezoelectric type that converts dynamic pressure to an output signal scaled in pico-coulombs per unit of pressure.
The 350500 charge amplifier design allows its use with a number of sensors designed to monitor combustion instability.

The Dual Pressure flexiTIM* module interfaces 2 individual pressure transducers to the Trendmaster* 2000 System and is intended for non-dynamic pressure applications.

The flexiTIM module and cable interfaces with pressure transducers using a 4-pin, locking bayonet connection. Compatible transducers are standard, millivolt output type devices with an output sensitivity of 10 mV/V.
This flexibility allows the dual pressure flexiTIM system to measure a wide range of pressures under a variety of operating conditions. We offer a standard transducer for use with the flexiTIM module for convenience.